AFHK SERIES (4-STAGE)
Hypoid- Special design for continuous (S1) or cyclic (S5) duty operation
- Stainless steel housing, aluminum black anodized motor adapter flange
- Stainless steel output shaft with or without key, or with spline (DIN5480)
- Helical gear design
- Nominal torques:
- T2N : 1,975 Nm - 4,285 Nm
- Ratios
- 4-stage : 1,225 / 1,400 / 1,750 / 2,000 / 2,800 / 3,500 / 5,000 / 7,000 / 10,000
- Low backlash
- 4-stage : ≤ 2 arcmin
- High efficiency
- 4-stage : ≥ 90%
- Easy mount
- Low noise
- Compact structure
- Sizes available: AFHK1,225 / AFHK1,400 / AFHK1,750 / AFHK2,000 / AFHK3,500 / AFHK5,000 / AFHK7,000 / AFHK10,000
| Model No. | Stage | Ratio¹ | AFHK240 | |
| Nominal Output Torque T2N | Nm | 4 | 1,225 | 4,070 |
| 1,400 | 4,085 | |||
| 1,750 | 4,100 | |||
| 2,000 | 4,120 | |||
| 2,800 | 3,185 | |||
| 3,500 | 4,180 | |||
| 5,000 | 4,285 | |||
| 7,000 | 3,445 | |||
| 10,000 | 2,240 | |||
| Emergency Stop Torque T2Not | Nm | 4 | 1,225~10,000 | 2 times T2N |
| Max. Acceleration Torque T2b | Nm | 4 | 1,225~10,000 | 1.5 times T2N |
| No Load Running Torque(2) | NM | 4 | 1,225~10,000 | 0.4 |
| Backlash(3) | arcmin | 4 | 1,225~10,000 | ≤2 |
| Torsional Rigidity | Nm/arcmin | 4 | 1,225~10,000 | 510 |
| Nominal Input Speed n1N | rpm | 4 | 1,225~10,000 | 3,700 |
| Max. Input Speed | rpm | 4 | 1,225~10,000 | 5,500 |
| Max. Radial Load F2r(4) | N | 4 | 1,225~10,000 | 30,000 |
| Max. Axial Load F2a(4) | N | 4 | 1,225~10,000 | 15,000 |
| Max. Tilting Moment M2k(4) | Nm | 4 | 1,225~10,000 | 5,420 |
| Operating Temp. | °C | 4 | 1,225~10,000 | -10º C~ 90º C |
| Degree of Gearbox Protection | 4 | 1,225~10,000 | IP65 | |
| Lubrication | 4 | 1,225~10,000 | Synthetic lubrication grease | |
| Mounting Position | 4 | 1,225~10,000 | All directions | |
| Running Noise (5) | dB(A) | 4 | 1,225~10,000 | ≤72 |
| Efficiency | % | 4 | 1,225~10,000 | ≥90% |
(1) Ratio ( i = N in / N out)
(2) These values are measured by gearbox with ratio 10,000 (4-stage) at 3,000 rpm no loading.
(3) Backlash is measured at 2% of Nominal Output Torque T2N
(4) Applied to the output shaft center at 100 rpm.
(5) These values are measured by gearbox with ratio 10,000 (4-stage) at 3,000 rpm no loading.
By lower ratio and/or higher RPM, the noise level could be 3 to 5 dB higher.
| Model No. | AFHK240 | |
| Ø(1) | stage | 4-st |
| 24 | kg.cm2 | 4.61 |
| 28 | 6.14 | |
| 32 | 8.17 | |
| 35 | 15.56 | |
| 38 | 18.19 | |
(1) Ø = Input shaft diameter.
| AFHKB075 | |
| D1 | 290 |
| D2 | 17 |
| D3 h6 | 85 |
| D4 g6 | 200 |
| D5 | 92.2 |
| D6 | M20 x 2.5P |
| D7 h6 | 85 |
| D8 | 210 |
| L1 | 245 |
| L2 | 130 |
| L3 | 40 |
| L4 | 3 |
| L5 | 125 |
| L6 | 3 |
| L7 | 22 |
| L8 | 31 |
| L9 | 15 |
| L10 | 42 |
| L11 | 378 |
| L12 | 115 |
| L13 | 663 |
| L16 | 228 |
| L17 | 60 |
| L18 | 36 |
| L19 | 53 |
| L23 | 4 |
| L24 | 0.5 |
| B1 h9 | 22 |
| H1 | 90 |
| X DINS480 | W80 x 2 x 30 x 38 x 6m |
(1) Dimensions are related to motor interface. Please contact APEX for details.
Recaptcha | Site by Merkelijkheid.nl