APK 2 stage

+31 492 509 995

Design Tool

Offer

Right angle bevel gear steel

Heavy Duty right angel spiral bevel gearbox
Black coated steel housing, aluminum output and motor adapter flange
Steel output shaft, flange ISO 9409
Helical gear technology
Nominal Torques:
- T_2N : 75 Nm - 5.680 Nm
Ratios
- 2-stage : 4 / 5.5 / 8 / 11
Low Backlash
- 2-stage : ≤ 2 arcmin
High Efficiency
- 2-stage : ≥ 95%
Easy mount
Low noise
Compact structure
Sizes available: APK090 / APK110 / APK140 / APK200 / APK255 / APK285

Brochure Mounting instruction User manual Order code Optimum gearbox Standard drawings

Model No.		Stage	Ratio¹	APK090	APK110	APK140	APK200	APK255	APK285
Nominal Output Torque T_2N	Nm	2	4	75	510	845	1,728	2,805	5,545
			5.5	105	440	745	1,665	2,590	4,700
			8	150	525	845	1,584	2,610	5,680
			11	210	455	765	1,710	2,655	4,800
Emergency Stop Torque T_2Not	Nm	2	4~11	2 times T_2N
Max. Acceleration Torque T_2b	Nm	2	4~11	1.5 times T_2N
No Load Running Torque⁽²⁾	NM	2	4~11	2.5	5.8	12	25	48	95
Backlash⁽³⁾	arcmin	2	4~11	≤2
Torsional Rigidity	Nm/arcmin	2	4~11	27	56	112	389	642	1,275
Nominal Input Speed n₁_N	rpm	2	4~11	3,600	3,000	2,300	1,800	1,500	1,100
Max. Input Speed	rpm	2	4~11	6,000	5,500	4,500	3,500	3,000	2,200
Max. Axial Load F_2a⁽⁴⁾	N	2	4~11	2,220	4,070	8,530	17,000	26,900	39,200
Max. Tilting Moment M_2k⁽⁴⁾	Nm	2	4~11	280	480	1,310	3,530	5,920	9,230
Operating Temp.	°C	2	4~11	- 10º C~ 90º C
Degree of Gearbox Protection		2	4~11	IP65
Lubrication		2	4~11	Synthetic lubrication grease
Mounting Position		2	4~11	All directions
Running Noise ⁽³⁾	dB(A)	2	4~11	≤68	≤68	≤70	≤70	≤72	≤74
Efficiency	%	2	4~11	≥95%

1. Ratio ( i = N in / N out )
2. Backlash is measured at 2% of Nominal output torque T2N.
3. These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3.000 rpm without load.
4. Applied to the output flange center at 100 rpm.
5. Continuous operation is not recommended.

Download as PDF

Model No.		APK090	APK110	APK140	APK200	APK255	APK285
Ø⁽¹⁾	Stage	2st	2st	2st	2st	2st	2st
11	kg.cm²	0.41	-	-	-	-	-
14		0.41	-	-	-	-	-
19		1.61	1.61	-	-	-	-
24		3.90	4.01	5.61	-	-	-
28		-	5.53	5.61	-	-	-
32		-	7.57	8.11	-	-	-
35		-	14.95	15.32	15.32	-	-
38		-	17.58	17.72	17.72	-	-
42		-	-	22.95	22.95	23.74	-
48		-	-	52.74	52.74	53.49	55.14
55		-	-	-	-	87.34	89.59
60		-	-	-	-	-	113.06

(1) Ø = Input shaft diameter.

Download as PDF

	APK090	APK110	APK140	APK200	APK255	AOK285
D1 H7	31.5	40	50	80	100	100
D2	50	63	80	125	140	160
D3 h7	63	80	100	160	180	200
D4 h7	90	110	140	200	255	285
D5	109	135	168	233	280	310
D6xPitchxDeep	M6x1Px11	M8x1.25Px12	M8x1.25Px15	M10x1.5Px20	M16x2Px25	M24x3Px37
D7	120	147	180	249.5	302	332
5.5D8	5.5	5.5	6.6	9	13.5	13.5
D9	92	116	156	156	195	240
L1	15	15	15	16	16	16
L2	30	29	38	50	66	75
L3	7	7	7.5	8.5	13.5	16.5
L4	7	8	10	12	18	20
L6	100.5	124.5	175.5	185	199	265.5
L7	61.5	76	97.5	9735	105.5	141
L8	192	229.5	311	332.5	370.5	481.5
L9	113.5	147.5	193.5	196.5	229	260
X in degree	30	30	22.5	22.5	24	26
Y in degree	30	30	22.5	22.5	24	26
Z	12	12	16	16	12	12
U in degree	22.5	22.5	15	15	11.25	11.25
W	16	16	24	24	32	32