AHK series (4-stage)
Hypoid- Heavy Duty right angel Hypoid gearbox
- Black coated steel housing, aluminum output and motor adapter flange
- Steel output shaft, flange ISO 9409
- Helical gear technology
- Nominal Torques:
- T2N : 1,975 Nm - 13,585 Nm
- Ratios
- 4-stage : 1,225 / 1,400 / 1,750 / 2,000 / 2,800 / 3,500 / 5,000 / 7,000 / 10,000
- Low Backlash
- 4-traps : ≤ 2 arcmin
- High Efficiency
- 4-stage : ≥ 90%
- Easy mount
- Low noise
- Compact structure
- Sizes available: AHK285 / AHK355 / AHK450
|
Model |
Stage | Ratio1 | AHK285 | AHK355 | AHK450 | |
| Nominal output torque T2N | Nm | 4 | 1,225 | 4,070 | 7,145 | 13,490 |
| 1,440 | 4,085 | 7,170 | 13,535 | |||
| 1,750 | 4,100 | 7,200 | 13,585 | |||
| 2,000 | 4,120 | 7,200 | 12,000 | |||
| 2,800 | 3,185 | 6,320 | 12,145 | |||
| 3,500 | 4,180 | 7,330 | 13,150 | |||
| 5,000 | 4,285 | 5,350 | 9,050 | |||
| 7,000 | 3,445 | 6,780 | 12,670 | |||
| 10,000 | 2,240 | 4,425 | 9,370 | |||
| Emergency stop torque T2NOT | Nm | 4 | 1,225~10,000 | 2 times nominal output torque T2N | ||
| Max. Acceleration torque T2B | Nm | 4 | 1,225~10,000 | 1,5 times nominal output torque T2N | ||
| No load running torque (2) | Nm | 4 | 1,225~10,000 | 0,4 | 0,4 | 1 |
| Backlash (3) | arcmin | 4 | 1,225~10,000 | ≤ 2 | ≤ 2 | ≤ 2 |
| Torsional rigidity | Nm/ arcmin |
4 | 1,225~10,000 | 1,275 | 2,500 | 5,100 |
| Nominal input speed N1N | rpm | 4 | 1,225~10,000 | 3,700 | 3,700 | 3,400 |
| Max. input speed N1B | rpm | 4 | 1,225~10,000 | 5,500 | 5,500 | 5,000 |
| Max. radial load F2a(3) | N | 4 | 1,225~10,000 | 39,200 | 101,500 | 143,700 |
| Max. Tilting moment M2k(3) | Nm | 4 | 1,225~10,000 | 9,230 | 29,100 | 63,300 |
| Operating temperature | ºC | 4 | 1,225~10,000 | -10ºC ~+ 90ºC | ||
| Degree of Protection | 4 | 1,225~10,000 | IP65 | |||
| Lubrication | 4 | 1,225~10,000 | Synthetisch lubrication grease | |||
| Degree of Protection | 4 | 1,225~10,000 | All directions | |||
| Running noise (3) | dB(A) | 4 | 1,225~10,000 | ≤ 72 | ≤ 74 | ≤ 76 |
| Efficiency | % | 4 | 1,225~10,000 | ≥ 90 % | ||
(1) Ratio ( i = N in / N out )
(2) Backlash is measured at 2% of Nominal output torque T2N.
(3) These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3.000 rpm without load.
(4) Applied to the ourput flange center at 100 rpm.
(5) Continuous operation is not recommended
| Model | AHKA285 | AHKA355 | AHKA450 | |
| Ø (1) (C3) | 4-st. | 4-st. | 4-st. | |
| 24 | kg*cm2 | 5.63 | 5.63 | - |
| 28 | 7.18 | 7.18 | - | |
| 32 | 10.10 | 10.10 | 12.63 | |
| 35 | 15.54 | 15.54 | 17.75 | |
| 38 | 21.32 | 21.32 | 23.26 | |
(1) ø = Input shaft diameter
AHK 4-stage series:
| Dimensions | AHKA285 | AHKA355 | AHKA450 |
| D1 H7 | 100 | 120 | 155 |
| D2 | 160 | 200 | 250 |
| D3 h7 | 200 | 250 | 315 |
| D4 h7 | 285 | 355 | 450 |
| D5 | 310 | 385 | 490 |
| D6 x spoed x diepte | M20 x 2.5P x 31 | M24 x 3P x 32 | M30 x 3.5P x 40 |
| D7 | 332 | 415 | 530 |
| D8 | 13.5 | 17.5 | 22 |
| D9 | 210 | 210 | 255 |
| L1 | 16 | 35 | 24 |
| L2 | 75 | 80 | 85 |
| L3 | 16.5 | 20 | 20 |
| L4 | 20 | 45 | 60 |
| L5 | 31 | 31 | 36 |
| L6 | 300 | 332 | 447.5 |
| L7 | 115 | 115 | 131 |
| L8 | 490 | 527 | 663.5 |
| L9 | 228 | 228 | 265.5 |
| X in degrees | 24 | 22.5 | 30 |
| Y in degrees | 24 | 22.5 | 30 |
| Z | 12 | 16 | 12 |
| U in degrees | 22.5 | 30 | 30 |
| V degrees | 22.5 | 30 | 30 |
| W | 16 | 12 | 12 |
(1) Input dimensions vary according to motor flange. Please contact Apex Dynamics for details.
Recaptcha | Site by Merkelijkheid.nl