Tel: +31 (0)492 509 995+32 (0)3 808 15 62
Nederlands / English
SearchApex search
Hypoid

MGOK series (2-stage)

  • Wide holes in output flange
  • Output flange ISO 9409
  • Ratio 12 to 100
  • Torque 57 Nm – 3.750 Nm
MGOK series (2-stage)
  • Wide holes in output flange, ideal for rack and pinion mounting
  • Reinforced axial and radial load
  • Heavy Duty gearbox
  • Steel output flange ISO 9409
  • Helical gear technology
  • Nominal Torques:
    • T2N : 57 Nm - 3.750 Nm
  • Ratios
    • 2-stage : 12 / 15 / 16 / 20 / 25 / 28 / 35 / 40 / 49 / 50 / 70 / 100
  • Low Backlash
    • 2-traps : ≤ 4 arcmin
  • High Efficiency
    • 2-stage : ≥ 94%
  • Easy mount
  • Low noise
  • Compact structure
  • Sizes available: MGOK115 / MGOK140 / MGOK170 / MGOK240 / MGOK285 / MGOK320

Model

 Stage Ratio1 MGOK115 MGOK140 MGOK170 MGOK240 MGOK285 MGOK320
Nominal output torque T2N Nm 2 12 195 365 805 1.495 1.680 3.280
15 - - - - 2.005 3.675
16 185 350 775 1.510 1.680 3.280
20 180 335 750 1.520 1.780 3.710
25 195 350 710 1.320 1.775 3.735
28 170 320 720 1.465 1.560 3.ooo
35 190 355 715 1.330 1.950 3.750
40 160 340 680 1.405 1.440 2.400
49 135 290 585 1.105 1.680 2.685
50 185 345 725 1.345 1.800 3.000
70 135 295 600 1.130 1.710 2.730
100 57 160 350 605 915 1.590
Emergency stop torque T2NOT  Nm 2 4~100 2 times nominal output torque T2N
Max. Acceleration torque T2B Nm 2 4~100 1,5 times nominal output torque T2N
No load running torque  (2) Nm 2 12~100 1,3 2 3,1 6 13 16
Backlash  (3) arcmin 2 12~100 ≤ 4 ≤ 4 ≤ 4 ≤ 4 ≤ 4 ≤ 4
Torsional rigidity Nm/
arcmin		 2 12~100 27 56 112 389 642 1.275
Nominal input speed N1N rpm 2 12~100 3.000 2.800 2.700 2.200 2.100 2.000
Max. input speed N1B rpm 2 12~100 6.000 6.000 4.500 4.500 4.000 3.000
Max. radial load F2a(4) N 2 12~100 2.900 4.070 13.700 29.000 40.000 46.000
Max. Tilting moment M2a(4) Nm 2 12~100 1.300 2.180 3.600 10.500 18.400 22.000
Operating temperature ºC 2 12~100 -10ºC ~+ 90ºC
Degree of Protection 2 12~100 IP67
Lubrication 2 12~100 Synthetisch lubrication grease
Mounting position 2 12~100 All directions
Running noise (3) dB(A) 2 12~100 ≤ 66 ≤ 68 ≤ 68 ≤ 70 ≤ 70 ≤ 72
Efficiency % 2 12~100 ≥ 94 %
  1. Ratio ( i = N in / N out )
  2. Backlash is measured at 2% of Nominal output torque T2N.
  3. These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3.000 rpm without load.
  4. Applied to the output flange center at 100 rpm.
  5. Continuous operation is not recommended.


Maximum tilting moment:

AH Tilting Moment

 

 

 

Max Tilting Moment

 

 

 

 

Size MGOK115 MGOK140 MGOK170 MGOK240 MGOK285 MGOK320
Z2 (mm) 81 123.7 104.6 145.7 183.4 196.1

Applied to the output flange center at 100 rpm.

Model MGOK115 MGOK140 MGOK170 MGOK240 MGOK285 MGOK320
Ø (1) (C3) 2-st. 2-st. 2-st. 2-st. 2-st. 2-st.
8 kg*cm2 - - - - - -
11 0,18 - - - - -
14 0,50 0,52 - - - -
19 0,65 1,69 1,71 - - -
24 - 4,89 5,05 6,92 - -
28 - - 6,55 6,98 - -
32 - - 9,47 10,18 10,18 -
35 - - 14,91 15,21 15,21 15,68
38 - - 20,69 20,70 20,70 21,69
42 - - - 22,83 22,83 23,59
48 - - - 58,45 58,45 59,30
55 - - - - - -

(1) ø = Input shaft diameter

MGK 2-traps serie:

 Dimensions MGOK090 MGOK110 MGOK140 MGOK200 MGOK255 MGOK285
D1 H7 31,5  40 50 80 100 100
D2 50 63 80 125 140 160
D3 h7 63 80 100 160 180 200
D4 h7 115 140 170 240 285 320
D5 135 167 200 276 327 368
D6 x pitchx deep M6 x 1P x 10 M6 x 1P x 11  M8 x x1.25P x15 M10 x 1.5P x 20 M16 x 2P x 25 M20 x 2.5P x 31
D8 5,5 5,5 6,6 9 13,5 13,5
D10 x pitch M5x0.8P M6x1P M8x1.25P M10x1.5P M12x1.75P M16x2P
D11 x pitch M6x1P M8x1.25P M10x1.5P M12x1.75P M16x2P M16x2P
D12 5.7 7.7 9.7 11.7 15.7 15.7
L1 15 15 15 16 16 16
L2 30 29 38 50 66 75
L3 7 7 7,5 8,5 13,5 16,5
L4 7 8 10 12 18 20
L5 13 17 25 31 31 36
L6 90,5 114 147,5 175 191,5 249,5
L7 53 68,3 89 115 115 131
L8 173,5 211,3 274,5 340 372,5 455,5
L9 114,5 129 173,5 228 228 265,5
L10 h8 130 160 190 260 315 350
L11 145 180 215 280 335 390
L12 8 10 12 14 18 22
L13 39.7 49.1 58.8 79.2 91.4 108.2
L14 53.2 65.8 78.8 104.1 123.4 143
L15 41.6 51.4 61.6 90.5 107.3 115.8
L16 54.6 67.6 80.9 113 135.5 148.9
X in degrees 45 22.5 30 30 24 24
Y in degrees 45 22.5 30 30 24 24
Z 8 12 12 12 12 12
U in degrees 38 38 38 41 41 39
V in degrees 16 16 16 14 15 15
(1) Input dimensions vary according to motor flange. Please contact Apex Dynamics for details.

Downloads

BrochureDownload
Mounting instructionsDownload
User manualDownload
Order codeDownload
Optimum gearboxDownload
Standard drawingsDownload

Need help with your application? Our specialists are happy to use their years of experience to assist you in selecting the right products.

DELIVERY CONDITIONS

PRIVACY POLICY

DISCLAIMER

Website byMerkelijkheid