Tel: +31 (0)492 509 995+32 (0)3 808 15 62
Nederlands / English
SearchApex search
In line planetary

MGO series

  • Wide holes in output flange
  • Output flange ISO 9409
  • Ratio 4 to 100
  • Torque 55 Nm – 4.290 Nm
MGO series
  • Wide holes in output flange, ideal for rack and pinion mounting
  • Reinforced axial and radial load
  • Heavy Duty gearbox
  • Steel output flange ISO 9409
  • Helical gear technology
  • Nominal Torques:
    • T2N : 55 Nm - 4.290 Nm
  • Ratios
    • 1-stage : 4 / 5 / 7 / 10
    • 2-stage : 16 / 20 / 21/ 25 / 28 / 31 / 35 / 40 / 46 / 50 / 61 / 70 / 91 / 100
  • Low Backlash
    • 1-stage : ≤ 3 arcmin
    • 2-stage : ≤ 4 arcmin
  • High Efficiency
    • 1-stage : ≥ 97%
    • 2-stage : ≥ 94%
  • Easy mount
  • Low noise
  • Compact structure
  • Sizes available: MGO115 / MGO140 / MGO170 / MGO240 / MGO285 / MGO320

Model

 Stage Ratio1 MGO115 MGO140 MGO170 MGO240 MGO285 MGO320
Nominal output torque T2N Nm 1 4 205 380 765 1,415 2,190 4,035
5 185 325 660 1,225 1,905 3,505
7 135 260 515 980 1,530 2,530
10 55 160 315 700 1,070 1,810
2 16 195 385 805 1,485 2,295 4,215
20 190 370 795 1,495 1,990 3,660
21 195 345 700 1,295 2,005 3,685
25 195 345 700 1,295 2,005 3,685
28 180 345 755 1,510 2,335 4,290
31 135 280 560 1,050 1,620 2,590
35 195 350 705 1,310 2,030 3,725
40 96 220 615 1,260 2,360 4,280
46 55 160 335 660 1,005 1,700
50 120 275 715 1,325 2,050 3,765
61 135 285 585 1,095 1,670 2,675
70 135 285 585 1,095 1,670 2,675
91 55 160 345 660 1,005 1,700
100 55 160 345 660 1,005 1,700
Emergency stop torque T2NOT  Nm 1,2 4~100 3 times nominal output torque T2N
Max. Acceleration torque T2B Nm 1,2 4~100 1,5 times nominal output torque T2N
No load running torque  (2) Nm 1 4~10 0,7 1,4 3,5 7 11 14
2 16~100 0,3 0,6 1,3 2,2 3,5 4,5
Backlash  (3) arcmin 1 4~10 ≤ 3 ≤ 3 ≤ 3 ≤ 3 ≤ 3 ≤ 3
2 16~100 ≤ 4 ≤ 4 ≤ 4 ≤ 4 ≤ 4 ≤ 4
Torsional rigidity Nm/
arcmin		 1,2 4~100 22 60 115 395 650 1,050
Nominal input speed N1N rpm 1 4~10 3,600 3,600 3,000 2,700 2,400 2,100
2 16~100 4,600 4,600 4,000 3,700 3,400 3,100
Max. input speed N1B rpm 1 4~10 6,000 6,000 5,000 4,500 4,000 3,500
2 16~100 7,000 7,000 6,000 5,500 5,000 4,500
Max. radial load F2a(4) N 1,2 4~100 2,900 4,070 13,700 29,000 40,000 46,000
Max. Tilting moment M2a(4) Nm 1,2 4~100 1,300 2,180 3,600 10,500 18,400 22,000
Operating temperature ºC 1,2 4~100 -10ºC ~+ 90ºC
Degree of Protection 1,2 4~100 IP67
Lubrication 1,2 4~100 Synthetisch lubrication grease
Mounting position 1,2 4~100 All directions
Running noise (3) dB(A) 1 4~10 ≤ 59 ≤ 64 ≤ 65 ≤ 66 ≤ 66 ≤ 66
2 16~100 ≤ 59 ≤ 60 ≤ 63 ≤ 66 ≤ 66 ≤ 66
Efficiency % 1 4~10 ≥ 97 %
2 16~100 ≥ 94 %
  1. Ratio ( i = N in / N out )
  2. Backlash is measured at 2% of Nominal output torque T2N.
  3. These values are measured by gearbox with ratio = 10 (1-stage) or ratio = 100 (2-stage) at 3.000 rpm without load.
  4. Applied to the output flange center at 100 rpm.
  5. Continuous operation is not recommended.

Maximum tilting moment:

AH Tilting Moment

 

 

 

Max Tilting Moment

 

 

 

 

Size MGO115 MGO140 MGO170 MGO240 MGO285 MGO320
Z2 (mm) 84.5 106.2 90 122.8 133.2 175.5

Applied to the output flange center at 100 rpm.

Size MGO115 MGO140 MGO170 MGO240 MGO285 MGO320
Ø (1) (C3) 1-tr. 2-tr. 1-tr. 2-tr. 1-tr. 2-tr. 1-tr. 2-tr. 1-tr. 2-tr. 1-tr. 2-tr.
8 kg*cm2 - - - - - - - - - - - -
11 - 0.17 - - - - - - - - - -
14 0.53 0.21 - 0.53 - - - - - - - -
19 0.68 0.63 1.83 0.68 - 1.83 - - - - - -
24 4.52 - 5.04 4.52 5.63 5.04 - 5.63 - - - -
28 - - 6.33 - 7.18 6.33 - 7.18 - - - -
32 - - 8.73 - 10.10 8.73 12.63 10.10 - 12.63 - -
35 - - 14.04 - 15.54 14.04 17.75 15.54 17.35 17.75 28.18 20.80
38 - - 19.05 - 21.35 19.05 23.26 21.32 23.61 23.26 28.18 27.05
42 - - - - 23.20 - 25.40 23.20 25.50 25.40 30.52 28.95
48 - - - - 56.07 - 61.02 56.07 61.22 61.02 66.85 64.66
55 - - - - - - 88.51 - 88.86 - 94.91 -
60 - - - - - - - - - - 117.73 -

(1) ø = Input shaft diameter

MGO serie:

Dimensions MGO115 MGO140 MGO170 MGO240 MGO285 MGO320
D1 H7 31.5  40 50 80 100 100
D2 50 63 80 125 140 160
D3 h7 63 80 100 160 180 200
D4 h7 115 140 170 240 285 320
D5 135 167 200 276 327 368
D6 x pitch x deep M6 x 1P x 10 M6 x 1P x 11  M8 x x1.25P x15 M10 x 1.5P x 20 M16 x 2P x 25 M20 x 2.5P x 31
D8 9 11 13.5 17.5 22 26
D10 x pitch M5x0.8P M6x1P M8x1.25P M10x1.5P M12x1.75P M16x2P
D11 x pitch M6x1P M8x1.25P M10x1.5P M12x1.75P M16x2P M16x2P
D12 5.7 7.7 9.7 11.7 15.7 15.7
L1 15 15 15 16 16 16
L2 30 29 38 50 66 75
L3 7 7 7.5 8.5 13.5 16.5
L4 10.5 12 15 17 22 25
L10 h8 130 160 190 260 315 350
L11 145 180 215 280 335 390
L12 8 10 12 14 18 22
L13 39.7 49.1 58.8 79.2 91.4 108.2
L14 53.2 65.8 78.8 104.1 123.4 143
L15 41.6 51.4 61.6 90.5 107.3 115.8
L16 54.6 67.6 80.9 113 135.5 148.9
X in degrees 45 22.5 30 30 24 24
Y in degrees 45 22.5 30 30 24 24
Z 8 12 12 12 12 12
U in degrees 38 38 38 41 41 39
V in degrees 16 16 16 14 15 15
(1) Input dimensions vary according to motor flange. Please contact Apex Dynamics for details.

Flange Shaft - MGO serie:

Dimenstions L1 L2 D3 h6 D6 L9 L10 Order Code
MGO115 41 30 22 M8 7.2 19 FLS-AH090-S22
32 M12 10 28 FLS-AH090-S32
MGO140 51 38 32 M12 10 28 FLS-AH110-S32
40 M16 12 36 FLS-AH110-S40
MGO240 54 38 40 M16 12 36 FLS-AH140-S40
55 M20 15 42 FLS-AH140-S55
MGO285 73 52 55 M20 15 42 FLS-AH200-S55
75 M20 15 42 FLS-AH200-S75
 MGO320 150 123 90 M24 18 50 FLS-AH255-S90

Downloads

BrochureDownload
Mounting instructionsDownload
User manualDownload
Order codeDownload
Optimum gearboxDownload
Standard drawingsDownload

Need help with your application? Our specialists are happy to use their years of experience to assist you in selecting the right products.

DELIVERY CONDITIONS

PRIVACY POLICY

DISCLAIMER

Website byMerkelijkheid