Tel: +31 (0)492 509 995+32 (0)3 808 15 62
Nederlands / English
SearchApex search
Angle bevel gear stainless steel

AT-L series

  • Stainless housing and shafts
  • Spiral bevel gearbox with one input and two output shafts
  • Output shaft with or without key
  • Ratio 1 to 5
AT-L series
  • Spiral bevel gearbox with one input and two output shaft.
  • Stainless steel housing
  • Stainless steel input and 2 output shafts with or without key
  • Nominal torques:
    • T2N : 12 Nm - 3.200 Nm
  • Ratios
    • 1-stage : 1 / 1,5 / 2 / 3 / 4 / 5
  • Low backlash
    • 1-stage : ≤ 6 arcmin
  • High efficiency
    • 1-stage: ≥ 98%
  • Easy mountEasy mount
  • Low Noise
  • Compact structure
  • Sizes available: AT065L / AT075L / AT090L / AT110L / AT140L / AT170L / AT210L / AT240L / AT280L

Model No.

 Stage Ratio(1) AT065L AT075L AT090L AT110L AT140L AT170L AT210L AT240L AT280L
Nominal Output Torque T2N Nm 1 1 25 45 78 150 360 585 1,300 2,150 3,200
1.5 25 45 78 150 360 585 1,300 2,150 3,200
2 24 42 68 150 330 544 1,220 2,010 3,050
3 18 33 54 120 270 450 1,020 1,650 2,850
4 13 28 48 100 224 376 860 1,410 2,300
5 12 25 40 85 196 320 740 1,210 2,000
Max. Acceleration Torque T2B Nm 1 1~5 1.5 times nominal output torque T2N
Max. Acceleration Input Speed n1B rpm 1 1~5 7,500 6,500 5,500 4,500 3,500 3,000 2,200 2,000 1,700
Backlash(2) arcmin 1 1~5 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6 ≤ 6
Max. Radial Load F1rB2 (3)
Input d1		 N 1 1~5 700 950 1,450 2,100 2,700 3,800 7,800 9,600 10,500
Max. Radial Load F2rB3 (4)
Output d2		 N 1 1~5 900 1,100 1,700 2,700 4,800 6,600 11,500 16,000 18,000
Max. Axial Load F1aB2 (3)
Input d1		 N 1 1~5 350 425 725 1,050 1,350 1,900 3,900 4,800 5,250
Max. Axial Load F2aB3 (4)
Output d2		 N 1 1~5 450 550 850 1,350 2,400 3,300 5,750 8,500 9,000
Efficiency n % 1 1~5 ≥ 98 %
Weight kg 1 1~5 2.6 4.2 6.8 11.6 19.8 34.8 66.2 98.1 155.7
Operating Temp ºC 1 1~5 -10ºC~+90ºC
Lubrication 1 1~5 Synthetic lubrication
Noise Level(5) dB(A) 1 1~5 ≤68 ≤70 ≤74 ≤76 ≤77 ≤78 ≤80 ≤82 ≤83
  1. Ratio ( i = N in / N out )
  2. Backlash is measured at 2% of Nominal output torque T2N
  3. Applied to the input shaft center at n1B
  4. Applied to the output shaft center at n1B
  5. These values are measured by gearbox with ratio 5 (1-stage) at 1,500 rpm no loading.
    By lower ratio and/or higher RPM, the noise level could be 3 to 5 dB higher.

Rotation Direction

draairichting-at-l-c-h
 

 

 

 

 

Maximum radial and axial loads:

AB axial load as

 

 

 

 

 

 

 

The maximum radial and axial loads on the output shaft of the gearbox depends on the design of the gearbox supporting bearings.
Apex Dynamics uses the extension straddle oversized ball bearing design. This can take heavy load from both axles

 

 

ATB grafiek radial load

 

 

 

 

 

 

 

 

 

 

 

Permitted radial load F2r on center of output shaft X = ½ x L for various output speeds.

 

 

ATB grafiek position load

 

 

 

 

 

 

 

 

 

 

If radial force F2r is not exerted on the center of the ouput shaft X < ½ x L or X > ½ x L, the permitted radial and axial loads can be calculated by the position load factor Kb on the above diagram.

 

Model No.

 Stage Ratio1 AT065L AT075L AT090L AT110L AT140L AT170L AT210L AT240L AT280L
Mass moments of inertia  J1 kg*cm2  1 1 0.51 1.30 3.16 7.70 23.57 58.99 195.40 369.34 799.12
1.5 0.64 1.16 2.82 6.74 19.37 49.28 155.45 283.58 595.78
2 0.44 1.11 2.70 6.31 17.75 45.35 140.24 249.74 511.76
3 0.43 1.09 2.66 6.17 17.18 44.01 134.95 237.71 483.06
4 0.43 1.09 2.65 6.13 17.06 43.70 133.58 234.72 476.26
5 0.43 1.09 2.65 6.12 17.02 43.60 133.14 233.67 473.58

AT-L series 1-stage

at-l-afmetingen-1-traps

AT065L AT075L AT090L AT110L AT140L AT170L AT210L AT240L AT280L
D1 M4 M6 M6 M8 M10 M12 M16 M16 M16
D3 k6 13 16 18 22 32 40 50 55 60
D4 h7 63 73 88 108 135 165 205 235 275
D5 31 35 43 53 68 83 104 124 144
D6 M4 M5 M5 M8 M12 M16 M16 M16 M20
D7 21 22 28 33 47 55 75 85 110
D8 53 62 76 95 92 114 142 160 176
D9 4 X M4 X L7 4 X M5 X L8 4 X M5 X L8 6 X M6 X L10 6 X M6 X L10 6 X M8 X L12.5 6 X M8 X L12.5 6 X M8 X L12.5 6 X M10 X L15
D10 15.4 20.4 25.8 35.8 49.8 59.3 79.3 92.3 102.3
D11 g6 62.9 72.9 87 107 103 127 158 178 198
D12 62 72 86 106 104 128 160 180 200
D13 k6 13 16 18 22 32 40 50 55 60
D14 h7 63 73 88 108 135 165 205 235 275
D16 M4 M5 M5 M8 M12 M16 M16 M16 M20
L1 65 75 90 110 140 170 210 240 280
L2 19.5 30 35 40 50 60 75 85 110
L3 13 14.5 15 15 15 15 20 25 25
L4 2 2 2 2 2 2 2 2 2
L5 16 25 28 32 45 50 70 80 100
L6 2 2.5 3.5 4 2.5 5 2.5 2.5 5
L7 47.5 54 62 72 87 102 127 147 167
L8 67 84 97 112 137 162 202 232 277
L9 4.5 4.8 4.8 7.2 10 12 12 12 15
L10 10 12.5 12.5 19 28 36 36 36 42
L11 27 30 36 44 55 67 85 95 110
L12 19.5 30 35 40 50 60 75 85 110
L13 13 15 15 15 15 15 20 25 25
L14 2 2 2 2 2 2 2 2 2
L15 16 25 28 32 45 50 70 80 100
L16 2 2.5 3.5 4 2.5 5 2.5 2.5 5
L17 6 8 8 8 10 10 10 10 10
L18 43 52.5 55 60 60 70 90 105 120
L19 4.5 4.8 4.8 7.2 10 12 12 12 15
L20 10 12.5 12.5 19 28 36 36 36 42
L21 75.5 90 100 115 130 155 195 225 260
L22 95 120 135 155 180 215 270 310 370
B1 h9 5 5 6 6 10 12 14 16 18
B2 h9 5 5 6 6 10 12 14 16 18
H1 15 18 20.5 24.5 35 43 53.5 59 64
H2 15 18 20.5 24.5 35 43 53.5 59 64

Downloads

BrochureDownload
Mounting instructionsDownload
User manualDownload
Order codeDownload
Optimum gearboxDownload
Standard drawingsDownload

Need help with your application? Our specialists are happy to use their years of experience to assist you in selecting the right products.

DELIVERY CONDITIONS

PRIVACY POLICY

DISCLAIMER

Website byMerkelijkheid