APC series

Heavy duty gearbox
Output flange Curvic Plate
Ratio 4 to 400
Torque 95 Nm – 17,275 Nm

Heavy Duty gearbox
Black coated steel housing and output flange, aluminum motor adapter
Steel output shaft, with Curvic Plate flange
Helical gear technology
Nominal Torques:
- T_2N : 95 Nm - 17,275 Nm
Ratios
- 1-stage : 4 / 5.5
- 2-stage : 16 / 20 / 22 / 27.5 / 28 / 38.5 / 40 / 55
- 3-stage : 64 / 88 / 100 / 110 / 140 / 154 / 160 / 200 / 220 / 280 / 400
Low Backlash
- 1-stage : ≤ 1 arcmin
- 2-stage : ≤ 2 arcmin
- 3-stage : ≤ 2 arcmin
High Efficiency
- 1-stage : ≥ 97%
- 2-stage : ≥ 94%
- 3-stage : ≥ 92%
Easy mount
Low noise
Compact structure
Sizes available: APC090 / APC110 / APC140 / APC200 / APC255 / APC285 / APC355 / APC450

Model No.		Stage	Ratio¹	APC090	APC110	APC140	APC200	APC255	APC285	APC355	APC450
Nominal Output Torque T_2N	Nm	1	4	205	505	790	1,885	2,920	5,380	-	-
		1	5.5	230	435	735	1,635	2,535	4,580	8,300	16,050
		2	16	300	530	895	1,980	3,055	5,615	-	-
			20	300	535	900	1,995	3,080	5,660	-	-
			22	240	460	770	1,710	2,640	4,755	8,565	16,430
			27.5	240	460	775	1,720	2,660	4,785	8,620	16,530
			28	250	540	910	2,015	3,110	5,720	-	-
			38.5	245	465	785	1,740	2,690	4,830	8,700	16,680
			40	96	225	650	1,610	3,145	5,780	-	-
			55	130	315	795	1,740	2,715	4,875	8,775	16,830
		3	64	310	500	930	2,060	3,180	5,840	-	-
			88	250	470	800	1,780	2,720	4,920	8,830	16,930
			100	315	560	945	2,085	3,215	5,910	-	-
			110	250	475	810	1,790	2,760	4,945	8,875	17,020
			140	315	565	950	2,105	3,245	5,965	-	-
			154	250	480	815	1,805	2,785	4,980	8,940	17,150
			160	210	385	915	2,110	3,255	5,985	-	-
			200	265	480	960	2,125	3,270	6,020	-	-
			220	255	480	825	1,820	2,810	5,020	9,010	17,275
			280	250	575	970	2,140	3,300	6,070	-	-
			400	100	235	980	2,160	3,330	6,120	-	-
Emergency Stop Torque T_2Not	Nm	1,2,3	4~400	3 times T_2N
Max. Acceleration Torque T_2b	Nm	1,2,3	4~400	1,5 Times T_2n
No Load Running Torque⁽²⁾	NM	1	4~5.5	1.5	2.5	7.1	14	22	28	42	75
		2	16~55	0.6	1.1	3.7	8	12	18	17	26
		3	64~400	0.35	0.7	1.6	4	4.5	6.5	6	12
Backlash⁽³⁾	arcmin	1	4~5.5	≤1
Backlash⁽³⁾	arcmin	2,3	16~400	≤2
Torsional Rigidity	Nm/arcmin	1,2,3	4~400	42	95	205	650	1,200	1,800	2,850	5,700
Nominal Input Speed n₁_N	rpm	1	4~5.5	3,600	3,600	3,000	2,700	2,400	2,100	1,500	1,000
		2	16~55	4,600	4,600	4,000	3,700	3,400	3,100	2,500	2,000
		3	64~400	5,000	5,000	4,600	4,000	3,700	3,400	3,100	2,500
Max. Input Speed	rpm	1	4~5.5	6,000	6,000	5,000	4,500	4,000	3,500	3,000	2,000
		2	16~55	7,000	7,000	6,000	5,500	5,000	4,500	4,000	3,500
		3	64~400	7,000	7,000	7,000	6,000	5,500	5,000	4,500	4,000
Max. Axial Load F_2a⁽⁴⁾	N	1,2,3	4~400	2,220	4,070	8,530	17,000	26,900	39,200	101,500	143,700
Max. Tilting Moment M_2k⁽⁴⁾	Nm	1,2,3	4~400	280	480	1,310	3,530	5,920	9,230	29,100	63,300
Service Life	hr	1,2,3	4~400	20,000
Operating Temp.	°C	1,2,3	4~400	-10°C < +90° C
Degree of Gearbox Protection		1,2,3	4~400	IP65
Lubrication		1,2,3	4~400	Synthetic lubrication grease
Mounting Position		1,2,3	4~400	All directions
Running Noise ⁽²⁾	dB(A)	1	4~5.5	≤59	≤64	≤66	≤66	≤68	≤68	≤68	≤70
		2	16~55	≤60	≤62	≤64	≤66	≤67	≤67	≤68	≤70
		3	64~400	≤60	≤62	≤64	≤66	≤66	≤67	≤67	≤68
Efficiency	%	1	4~5.5	≥97%
		2	16~55	≥94%
		3	64~400	≥92%

Ratio ( i = N in / N out )
These values are measured by gearbox with ratio 5.5 (1-stage), ratio 55 (2-stage) or 220 (3-stage) at 3,000 rpm no loading.
Backlash is measured at 2% of Nominal Output Torque T_2N
Applied to the output flange center at 100 rpm.
Continuous operation is not recommended.

Maximum tilting moment:

Size		APC090	APC110	APC140	APC200	APC255	APC285	APC355	APC450
Z2 (mm)		84.5	106.2	90	122.8	133.2	175.5	220.6	275.3

Applied to the output flange center at 100 rpm.

Model No.		APC090			APC110			APC140			APC200			APC255			APC285			APC355		APC450
Ø⁽¹⁾	Stage	1	2	3	1	2	3	1	2	3	1	2	3	1	2	3	1	2	3	2	3	2	3
11	kg.cm²	-	-	0.16
14		0.42	0.21	0.19	-	-	0.21	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
19		0.66	0.60	-	1.84	0.66	0.6	-	-	0.66	-	-	-	--	-	-	-	-	-	-	-	-	-
24		3.94	-	-	4.11	3.94	-	4.61	4.11	3.94	-	-	4.11	-	-	-	-	-	-	-	-	-	-
28		-	-	-	5.48	-	-	6.14	5.48	-	-	-	5.48	-	-	6.14	-	-	-	-	-	-	-
32		-	-	-	7.36	-	-	8.17	7.36	-	-	8.17	7.36	-	-	8.17	-	-	-	-	-	-	-
35		-	-	-	14.04	-	-	15.54	14.04	-	17.75	15.54	14.04	-	17.75	15.54	-	-	17.75	-	-	-	-
38		-	-	-	16.71	-	-	18.19	16.71	-	20.17	18.19	16.71	-	20.17	18.19	-	23.66	20.17	-	20.17	-	23.66
42		-	-	-	-	-	-	23.2	-	-	25.40	23.20	-	28.88	25.40	-	-	28.88	25.40	28.79	25.40	-	28.95
48		-	-	-	-	-	-	52.42	-	-	55.18	52.42	-	58.64	55.18	-	69.78	58.64	55.18	92.76	55.18	106.06	58.64
55		-	-	-	-	-	-	-	-	-	88.51	-	-	92.48	-	-	104.22	92.48	-	105.41	-	118.67	-
60		-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	127.69	-	-	-	-	127.37	-

(1) Ø = Input shaft diameter.

	APC090	APC110	APC140	APC200	APC255	APC285	APC355	APC450
D1	36	46	60	80	90	120	120	132
D3	63	80	100	160	180	200	250	315
D4 h7	90	110	140	200	255	285	355	450
D5	109	135	168	233	280	310	385	490
D6	-	-	-	-	M12	M12	M16	M16
D7	120	147	180	249.5	302	332	415	530
D8	5.5	5.5	6.6	9	13.5	13.5	17.5	22
L2	32.5	31.5	40.5	52.5	68.5	77.5	82.5	87.5
L3	9.5	9.5	10	11	16	19	22.5	22.5
L4	7	8	10	12	18	20	45	60
U in degree	22.5	22.5	15	15	11.25	11.25	15	15
W	16	16	24	24	32	32	24	24